Welding Process V-5a

Travel Speed Faults Beginner welders tend to move the rod too quickly, especially those who are transitioning to arc welding from another we...

Travel Speed Faults

Beginner welders tend to move the rod too quickly, especially those who are transitioning to arc welding from another welding process. The pool of molten slag is wide, tall and bubbly, and shouldn't be mistaken for the weld pool!

The weld underneath the slag will be about half the width of the molten slag pool, and it takes longer than might be expected to build it up. Experienced arc welders say they can see the weld through the slag pool (they say it is darker and more red in colour).

Speed OK

The bead is fairly consistent. The ridges in the weld are semi-circular.

Speed Too Fast

Excessive speed results in a thin, weak bead. The ridges in the weld are elongated and triangular. Had the current been increased to compensate for the speed the ridges would still remain elongated.

Speed Too Slow

Welding too slowly results in a wide tall build up of weld. The shape of the weld is not consistent as the weld pool has built up and then collapsed into the crater. The poor control of the weld pool can result in cold joints and slag inclusions.