API 570 Piping Inspector Exam Mock-up Questions

The API Authorized Piping Inspector Certification Examination consists of two parts. The closed book part tests the candidate on knowled...

The API Authorized Piping Inspector Certification Examination consists of two parts. The closed book part tests the candidate on knowledge and tasks requiring an everyday working knowledge of API Standard 570 and the applicable reference documents. The open book portion of the examination requires the use of more detailed information that the inspector is expected to be able to find in the documents, but would not normally be committed to memory.

All the required documents (study materials API will not provide) you have to buy separately in API website or IHS global website. But during open book sessions of computer-based examination, you will get access to read the codes required for open-book exams in the Prometric system.

We have collected lot of questions with the answer from many sources for the piping inspectors exam. Some of the sample questions given below;

1) API 570 covers inspection, repair alteration, and re-rating procedures for metallic piping systems that __________.

1. Are being fabricated
2. Does not fall under ASTM B31.3
3. Have been in-service
4. Has not been tested

2) API 570 was developed for the petroleum refining and chemical process industries.

1. It shall be used for all piping systems.
2. It may be used, where practical, for any piping system.
3. It can be used, where necessary, for steam piping.
4. It may not be used unless agreed to by all parties.

3) API 570 __________ be used as a substitute for the original construction requirements governing a piping system before it is placed-in-service.

1. Shall not
2. Should
3. May
4. Can

4) API 570 applies to piping systems for process fluids, hydrocarbons, and similar flammable or toxic fluid services. Which of the following services is not specifically applicable?

1. Raw, intermediate, and finished petroleum products
2. Water, steam condensate, boiler feedwater
3. Raw, intermediate, and finished chemical products
4. Hydrogen, natural gas, fuel gas, and flare systems

5) Some of the classes of piping systems that are excluded or optional for coverage under API 570 are listed below. Which one is a mandatory included class?

1. Water
2. Catalyst lines
3. Steam
4. Boiler feedwater

We have like this model questions for the complete API570 Piping Inspector Exam in a single archived file.
It consists
Question Bank from API 570
Question Bank from API 571
Question Bank from API 574
Question Bank from API 577
Question Bank from API 578
Question Bank from ASME B16.5
Question Bank from ASME B31.3
Question Banks from ASME SEC. V
Question Banks from ASME SEC IX
to download complete question banks click here

Create your own website @ low price